We design and manufacture in Poland: non-metallic and stainless steel chains, sprockets, flights, bearings and wear parts for clarifiers. 1:1 interchangeable with 720 and 78 series — retrofit without rebuilding your system.
We are a manufacturer, not a distributor. We design, produce and test components in our own plant — so we personally stand behind their reliability.
We specialise in advanced solutions for wastewater treatment plants: high-performance chains, sprockets, gear racks, scraper flights and complete system components. Every product is designed to operate in the toughest environments — where corrosion, load and continuous operation are part of everyday reality.
Most of our products are made in our own plant in Poland, where we control every stage ourselves — from raw material to final testing. 100% of chains — every one, not a random sample — pass a proof-load test before shipment. That is how we maintain full quality control and short lead times.
We customise every detail to match your application, environment and expectations. A warehouse located in Europe ensures fast availability and an immediate response to urgent needs.
A complete range of components for rectangular clarifiers, bar screens and grit collectors — from chain and drive to wear parts.
In-house quality control · 100% of chains proof-loaded before shipment
6″ (152.4 mm) pitch collector chain in glass-reinforced nylon — a 1:1 replacement for cast iron 720 series. No corrosion, no lubrication, a fraction of the weight.
Lightweight alternative to metallic and cast 78-series drive chains. Glass-reinforced nylon, no lubrication, 316SS pin.
403 stainless collector chain — a higher strength-to-weight ratio than cast iron, without its brittleness and corrosion. Over 4 million feet in service.
Economical 403 stainless chain — a direct interchange for cast iron and non-metallic 720 chains, without cast iron corrosion.
403 stainless pintle drive chain — for where carbon steel and cast iron corrode. Runs on cast, non-metallic or stainless 78-style sprockets.
720-style sprockets in a three-piece, integrally molded design. Teeth of extreme wear resistance, split polyurethane hub.
Non-metallic sprocket with urethane hub and Nylon 6 teeth, with a shear-pin assembly protecting the drive from overload.
Heavy-duty jaw clutch / shear-pin assembly with cast nylon bodies and shear protection. Omni-directional hub for smooth drive engagement.
Flights in 6063 T-5 aluminium — an economical alternative to FRP and wood. Patented no-drill attachment, corrosion resistant.
FRP flights in SIGMA and DIAMOND profiles — corrosion- and chemical-resistant, up to 75% lighter than steel, large stiff cross-section.
Lightweight cast nylon shafts replacing heavy steel shafts. Reduce system drag, no lubrication, over 30 years of service.
Static sleeve bearings (Standard and Wide Profile / Clamping Band) for quick, low-cost shaft bearing replacement. Reduce chain drag.
Wall bearings that do not corrode — unlike metallic ones where oxidation freezes the shaft. Nylon shaft sleeve, no lubrication.
Molded UHMW-PE Black Repro wear shoes (~5 million g/mol molecular weight) — excellent durability and wear resistance at a far lower price than virgin UHMW.
Wear shoes with a built-in visual wear indicator — a colour appears once 50% of thickness is worn, removing the guesswork on replacement.
HMAX UHMW-PE wearstrips (~5 million g/mol molecular weight), UV inhibited. Slotted holes allow thermal expansion; mitered ends give smooth transitions.
Fiberglass scum pipe for removing surface scum, oils and grease. A replacement for cast iron and steel pipes — no seizing.
Roller chains, spur gears, gear racks and sprockets manufactured to your exact specification — built to your specifications.
Not sure about your chain designation? Send a photo or link dimensions — we'll match a replacement.
In-house quality — built into production
Not a random sample — every single chain. All quality control happens in our own plant in Poland: from incoming raw material, through production, to the final proof-load test. You install a component with verified strength, not a catalogue claim.
Incoming material inspection — full batch traceability
Manufacturing and measurement in-house, no subcontractors
Load test of 100% of chains before packing and shipment
Our components work where reliability, corrosion resistance and years of trouble-free service matter most.
Chain & flights, drive and idler sprockets, wearstrips
Collector and drive chains, sprockets
Abrasion-resistant collector systems
FRP scum pipes for oils and grease
We are a manufacturer, not a middleman. We design, produce and test every component ourselves — so we stand behind quality from raw material to shipment.
Every chain passes a proof-load test before it leaves our plant. You receive a component with verified strength — not a catalogue claim.
We manufacture and test components in our own plant in Poland — from material selection to final testing. No subcontractors, full batch traceability.
Non-metallic components need no lubrication and do not corrode — fewer shutdowns and inspections.
Over 30 years of life and 4 million feet of chain in operation — proven in real installations.
Direct replacements for 720 and 78 series — retrofit without rebuilding your existing system.
Up to 75% lighter than steel. Lower system drag and reduced load on the drive.
Materials resistant to chemicals, moisture and sunlight — ideal for the wastewater environment.
Sprockets, gear racks and components engineered to each customer's exact requirements.
We'll match components 1:1 to your system and prepare a free quote within 24 hours.
Request a quoteWe work with global leaders in the industrial chain industry from the Japan Chain Holdings group — combining proven Japanese and American engineering with European responsiveness.
Japanese industrial chain manufacturer with over 100 years of history and a top market share in chains for water purification and sewage treatment. Part of the Mitsui Matsushima group.
Japanese manufacturer of specialised industrial chains and a Japan Chain Holdings partner — high-durability components for water treatment systems.
American manufacturer of roller, engineering-class and environmental chains — a full line of components for the wastewater treatment industry. Headquartered in Marietta, Georgia, USA.
Tell us what clarifier you run or which component you need — we'll figure out the rest. The quote is free and non-binding.
Powering your business
